Registering The Machine With Scanncutcanvas - Brother 891-Z08 Operation Manual

REGISTERING THE MACHINE WITH ScanNCutCanvas

After the machine is registered with ScanNCutCanvas
(http://ScanNCutCanvas.Brother.com/), various
editing operations can be performed and data can be
transferred.
This section describes the procedure for linking a
machine with a specific number to a login ID.
If setup is not completed correctly or an error
message appears, see "ERROR MESSAGES" on
page 57.
Note
• A computer or mobile device that can run
ScanNCutCanvas and connect to the network
is required.
• Before continuing with this procedure, the
machine must be connected to the wireless
network. If it has not yet been connected, see
"Selecting the Connection Method" on
page 12, and perform the setup.
a
Click [ScanNCutCanvas] in the main window of
DesignNCut Manager.
A window for registering your login ID and
password appears.
20
b
Type in the login ID and password registered
with ScanNCutCanvas, and then click
[Register].
• First-time users must create a
• Only one serial number can be registered with
• If an error occurs while sending or receiving
a
b
Note
ScanNCutCanvas account.
one login ID for ScanNCutCanvas. To register a
different cutting machine with
ScanNCutCanvas, register a new account with
the new machine. In that case, the registration
for the first machine will be deleted.
data, see "ERROR MESSAGES" on page 57.