Wireless Network Setup Guide Cutting Machine Product Code: 891-Z02/Z03/Z04 Be sure to read this document before using the machine. We recommend that you keep this document nearby for future reference.
WPA™ and WPA2™ are trademarks of Wi-Fi Alliance®. Compilation and Publication Under the supervision of Brother Industries, Ltd., this manual has been compiled and published, covering the latest product descriptions and specifications. The contents of this manual and the specifications of this product are subject to change without notice.
Overview of “ScanNCut Online” for Data Transfer via a Wireless Network You can use a wireless network to send data created in ScanNCutCanvas (http://ScanNCutCanvas.Brother.com/) to your cutting machine as well as save data that you have edited on your machine to ScanNCutCanvas.
CONTENTS INTRODUCTION ......................... 1 Overview of “ScanNCut Online” for Data Transfer via a Wireless Network ........ 1 Setting Up the Wireless Network Connection ................3 Activating the Wireless Network ..........................3 Setting Up the Wireless Network ..........................3 Checking the Wireless Network Setup/Status ......................5 Using the “Others”...
Setting Up the Wireless Network Connection The first step of the setup is to connect your machine to a wireless network. If a connection is not established correctly and an error message appears, see “Error codes/Error messages” on page 11. Activating the Wireless Network Setting Up the Wireless Network A connection to the wireless network can be...
In the network settings screen, touch Type in the Network Key (Password) noted in beside “Setup Wizard”. step , and then touch the “OK” key. Any available SSIDs are searched for and displayed. Select the SSID noted in step , and then a Character input display touch the “OK”...
“WLAN Assistant Wizard” (WAW). indicate the protocol of the wireless network Download the application from being used. http://solutions.brother.com/snc2waw, and then follow the instructions that appear in the computer screen in When “Connection Fail: Err-xx” is indicated: order to complete the setup.
Using the “Others” Menu The “Others” menu is on page 2 of the network settings screen. The “Others” menu contains the following items. a TCP/IP can be manually entered. b Displays the MAC address. c All current network settings will be reset and returned to those when the machine was purchased.
Registering with ScanNCutCanvas for Your Machine After you have registered your machine with ScanNCutCanvas (http://ScanNCutCanvas.Brother.com/), they will be able to communicate via a wireless network connection to transfer data back and forth. If setup is not completed correctly and an error message appears, see “Error codes/Error messages”...
“Next” key. on a tablet. Open ScanNCutCanvas (http://ScanNCutCanvas.Brother.com/) on your computer or tablet, and then log in. Note • First time users should obtain a free account. A screen describing how to obtain the PIN code...
Click in the upper-right corner of the [MACHINE] screen. Touch the “OK” key. The page for managing your account appears. In the PIN code input screen on your machine, type the four-digit PIN code that appeared in Click the “Get PIN Code” button below the ScanNCutCanvas screen , and then touch “ScanNCut Online”.
Memo Note • Touch the “Register” key to register your • A single machine number is linked with a single machine with ScanNCutCanvas again. ScanNCutCanvas login ID. To link a different machine to ScanNCutCanvas, perform the registration operation again with that machine. In that case, the link with the previously registered machine will be cut.
Troubleshooting Please do not contact Brother Customer Service for assistance without the wireless security information. We cannot assist you in locating your network security settings. How can I find the wireless security information (SSID and Network Key) 1) You should see the documentation provided with your wireless access point/router.
Error code Cause/Solution The Authentication/Encryption methods used by the selected wireless access point/router are not supported by your machine. For infrastructure mode, change the authentication and encryption methods of the wireless access point/router. Your machine supports the following authentication methods: Authentication method Encryption method TKIP...
Error message Cause/Solution The machine is not connected to the network. Unconnected to the network. - Check that there is a good network connection. Check the network - A network connection may not yet be established. connection status. Wait a while, and then try again.
Please visit us at http://support.brother.com where you can get product support and answers to frequently asked questions (FAQs). These machines are approved for use in the country of purchase only. Local Brother companies or their dealers will only support machines purchased in their own countries.