Table of Contents
Advertisement
■ Preview Window
Computer
9
Mobile device
9
3,4
5
8
1. Load data
Imports cutting/drawing patterns from
ScanNCutCanvas or a computer.
2. Operation
Select [Cut] or [Draw] from the drop-down list.
1
*
Other settings may appear in the drop-down list if
2
a separately sold accessory kit is detected.
*
With the mobile device version, tap [Operation] to
3
display a screen for selecting [Cut] or [Draw].
4
3. Speed
With the slider, adjust the speed for cutting or
5
drawing.
*
With the mobile device version, tap [Settings] to
display a settings screen.
6
4. Pressure
With the slider, adjust the pressure for cutting or
drawing.
7
*
With the mobile device version, tap [Settings] to
display a settings screen.
8
5. Setting Reference
Displays a list of various settings. Refer to this table
before changing the settings.
6. Test Cut
Select [ON] or [OFF].
If [ON] is selected, [Test cut settings] will be available
and can be clicked to display a window allowing
detailed settings for trial cutting to be selected. For
details on displaying the window, see "Trial Cutting"
on page 35.
*
With the mobile device version, tap [Test Cut] to
display a settings screen.
7. Apply
Applies the settings that were either selected or
2
changed.
8. Start
6
Starts cutting or drawing. To stop the operation, see
"Cutting the Pattern" on page 37.
8
9. min.
Displays the cutting/drawing time.
3
4
Advertisement
Table of Contents
