Download  Print this page
   

Advertisement

Operation Manual Addendum
Cutting Machine
Product Code: 891-Z01
Be sure to read this document before using the machine.
We recommend that you keep this document nearby for future reference.

Advertisement

Table of Contents

   Also See for Brother 891-Z01

   Summary of Contents for Brother 891-Z01

  • Page 1 Operation Manual Addendum Cutting Machine Product Code: 891-Z01 Be sure to read this document before using the machine. We recommend that you keep this document nearby for future reference.
  • Page 2 Introduction This manual provides additional information not described in the Operation Manual. Be sure to read this information before using the machine. Trademarks IBM is a registered trademark or a trademark of International Business Machines Corporation. Microsoft, Windows and Windows Vista are registered trademarks or trademarks of Microsoft Corporation.
  • Page 3 Connecting the Machine to the Computer ■ Connecting Your Machine to the Note Computer Compatible models: ● • The connectors on the USB cable can only be IBM PC with a USB port as standard equipment inserted into a port in one direction. If it is IBM PC-compatible computer equipped with a difficult to insert the connector, do not insert it with force.
  • Page 4 Touch the “Saved Data” key to display the Recalling from the Computer destination memory selection screen. For Computers and Operating Systems, see “Connecting Your Machine to the Computer” on page 2. Plug the USB cable connector into the corresponding USB ports for the computer and for the machine.
  • Page 5 Touch the “Update” key to start the update. Update Procedure Using Computer For Computers and Operating Systems, see “Connecting Your Machine to the Computer” on page 2. While holding down in the operation When updating is finished, the completion panel, press to turn on the machine.
  • Page 6 Updated Operational Features Undoing an Operation Moving Patterns After Displaying Enlarged In the editing screen after patterns have been arranged in the mat, touch to undo the previous operation. When patterns are displayed enlarged (200% or 400%), they can be dragged to a different location. •...
  • Page 7 Scan Settings When saving a scanned image to a USB flash drive, the desired scanning area can be specified. Follow steps through in “Scan Settings” of “Tutorial 5- Scanning to USB” in the Operation Manual. Select “Custom”, and then touch the “OK” key. Using the touch pen, drag to select the scanning area, and then touch the “OK”...
  • Page 8 Please visit us at http://support.brother.com where you can get product support and answers to frequently asked questions (FAQs). English 891-Z01 Version A...

Comments to this Manuals

Symbols: 0
Latest comments: