Table of Contents
Advertisement
Note
• Depending on the material being used, it may
not be cut cleanly if the cutting pressure is not
correctly adjusted. For details on the
appropriate cutting pressure, see "Cutting
Settings" on page 30.
f
Click [Apply].
g
Click [Start].
The following window appears.
Memo
• If any machine button other than the power
button is pressed, the machine pauses cutting.
• The following message appears on the
machine's screen when cutting is paused. You
can stop or resume cutting from the machine.
Cutting paused. Resume: [OK]
Stop: [STOP]
36
■ Unloading the Mat
a
Press
on the operation panel to feed out
the mat.
b
Peel off the material from an area that is easily
removable, such as a corner, and then slowly
peel while maintaining an even pressure.
c
Holding the mat with your hand, use the
included spatula to peel off the cutout patterns
carefully.
a Spatula
Note
• For instructions on how to peel off the material,
see page 25, 27, 29.
a
Advertisement
Table of Contents
