Table of Contents
Advertisement
Chapter 2
BASIC OPERATIONS
PATTERN CUTTING
The following procedures use patterns to describe
the entire series of operations, from selecting a
pattern and editing it to cutting.
Tutorial 1 - Cutting Patterns
■ Connecting the Machine and
Computer
This machine and a computer installed with
DesignNCut Manager (application for selecting cut
settings) can be connected either wirelessly or with a
USB cable.
• For details on the connection methods, see
"CONNECTING THE MACHINE AND
COMPUTER" on page 12.
■ Turning On the Machine
Press
to turn on the machine.
• For details, see "Turning On/Off the Machine" on
page 6.
■ Setting the Holder
Install the cutting blade holder into the carriage of the
machine.
• For details, see "Installing and Uninstalling the
Holder" on page 32.
■ Loading the Mat
a
Attach the material that will be cut to the mat.
• For details on attaching material to the mat, see
"Attaching the material to the mat" on page 24.
b
While holding the mat level and lightly
inserting it into the feed slot, press
operation panel.
Lightly insert the mat so that it aligns with the guides
on the left and right sides of the feed slot and is tucked
under the feed rollers.
a
a Guides
b Feed rollers
The mat is fed in to complete the preparations for
cutting.
in the
b
a
33
2
Advertisement
Table of Contents
