Table of Contents
Advertisement
b
Using a commercially available brush, clean off
cuttings, lint, and dust.
Specifically clean off lint and dust around the blade. If
lint and dust accumulate between the blade and
holder, the blade may no longer rotate or the cutting
quality may become poor.
c
Attach the holder cap to the holder.
For details on attaching the holder cap, see "Installing"
on page 50.
■ Cleaning Inside the Machine
The Lint may also attach to the surface of the feed
rollers, preventing a mat to be loaded or unloaded
correctly. Use a soft brush to clean it.
a
Turn off the machine and disconnect the power
cord plug, and then disconnect the AC adapter
plug from the DC power jack on the back of the
machine.
b
Open the cover on the front of the machine.
52
c
Remove the holder from the carriage.
d
Use a commercially available brush to clean
around the feed slot and the carriage.
Advertisement
Table of Contents
