Table of Contents
Advertisement
Chapter 1
GETTING STARTED
PARTS AND FUNCTIONS
Unit Descriptions - Front
a
b
c
a Operation Panel
Allows you to view the current status of the machine
and the various menus. Press a button on the
operation panel to change the information displayed
in the LCD panel. In addition, if there are problems
with this machine, the error message relating to the
problem is displayed. For details on the error
messages, see "ERROR MESSAGES" on page 57.
b Carriage
Moves the installed holder for cutting or drawing.
1
2
3
1
Holder
Installs in the carriage to cut or draw on craft paper
or fabric. Use the holder designed specifically for
cutting or drawing.
2
Holder Guide
The guide secures the holder.
3
Holder Lock Lever
Releases the holder when the lever is raised. Locks
the holder when the lever is lowered.
4
c Grips
d Feed Slot Roller
e Front Tray Cover
c
Unit Descriptions - Rear
d
e
a USB port (for PC Connectivity)
b Slot
c DC Power Jack
d AC Adapter
e AC Power Cord
Grasped when moving the machine.
Feeds in or out a mat. The mat is fed by the feed
rollers on both sides.
Protects the feed rollers, carriage and holder. Open
the cover while the machine is operating.
a
b
e
When a wireless network is not available, use a USB
cable to connect the machine to the computer. For
Computers and Operating Systems, see "Devices
That Can Connect to This Machine" on page 3.
Allows a mat to be fed back and forth during an
operation. Do not place any objects near the slot that
would prevent the mat from being fed out.
c
d
Advertisement
Table of Contents
