System Identification Led; External Mini Control Panel Connectors; Internal Mini Control Panel Interconnects - Intel SR1625UR Technical Product Specification

Mini Control Panel Functionality
Color State
8.2.3

System Identification LED

The blue system identification LED is used to help identify a system for servicing. This is
especially useful when the system is installed when in a high density rack or cabinet that is
populated with several similar systems.
The blue System ID LED can be illuminated using one of the following mechanisms:

By pressing the System ID Button on the system control panel, the ID LED displays a
solid blue color, until the button is pressed again.

By issuing the appropriate hex IPMI "Chassis Identify" value, the ID LED either blinks
blue for 15 seconds and turns off or blinks indefinitely until the appropriate hex IPMI
System Identify value is issued to turn it off.
8.3

External Mini Control Panel Connectors

The mini control panel has one external USB port.
8.4

Internal Mini Control Panel Interconnects

All mini control panel signals are directed through a single 20-pin card edge interconnect. When
installed into the system, the mini control panel board blind mates to the hot-swap backplane.
58
Criticality Description




Table 46. External USB Connectors
Pin #
1 PWR_FP_USB2
2 USB_DN2_FP_R
3 USB_DP2_FP_R
4 GND
5 GND
6 GND
7 GND
Intel order number E47487-007
Processor 1 missing
Temperature (e.g., CPU ThermTrip, memory TempHi, critical
threshold crossed)
No power good – power fault
Processor configuration error (e.g., processor stepping
mismatch)
Description
Intel® Server System SR1625UR TPS
Revision 1.5