System Identification Led - Intel SR2612UR Product Specification

Intel® Server System SR2612UR TPS
Color State
Color State
Amber Blink
Amber Solid on
7.4

System Identification LED

The blue system identification LED helps to identify a system for servicing. This is especially
useful when the system is installed in a high-density rack or cabinet populated with several
similar systems.
The blue system ID LED lights-up by issuing the appropriate hex IPMI system identify value, the
ID LED either blinks blue for 15 seconds and turns off or blinks indefinitely until the appropriate
hex IPMI system identify value is issued to turn it off.
Revision 1.3
Criticality







Criticality
Non-critical Non-fatal alarm – system is likely to fail
Including, but not limited to:




Critical, non- Fatal alarm – system has failed or shut down
recoverable
Including, but not limited to:







Intel order number E76293-003
Description
Correctable errors over a threshold of ten and migrating to a
spare DIMM (memory sparing). This indicates that the user no
longer has spare DIMMs specifying a redundancy lost
condition. The corresponding DIMM LED should light up.
In a mirrored configuration, when memory mirroring takes
place and system loses memory redundancy. This is not
covered by the previous bullet.
Redundancy loss such as power supply or fan. This does not
apply to non-redundant subsystems.
PCI Express* link errors
CPU failure / disabled – if there are two processors and one of
them fails.
Fan alarm – Fan failure. Number of operational fans should be
more than the minimum number needed to cool the system.
Non-critical threshold crossed – temperature and voltage.
Description
Critical voltage threshold crossed
VRD hot asserted
Minimum number of fans to cool the system are not present or
have failed.
In non-sparing and non-mirroring mode if the threshold of ten
correctable errors is crossed within the window.
DIMM failure when there is one DIMM present and no good
memory is present.
Run-time memory uncorrectable error in non-redundant mode.
IERR signal asserted
Processor 1 missing
Temperature (for example, CPU ThermTrip, memory TempHi,
critical threshold crossed)
No power good – power fault.
Processor configuration error (for example, processor stepping
mismatch)
Control Panel
43