Speakers - HP Sprout Pro Maintenance & Service Manual

Speakers

Speakers are located on both sides of the computer. Each speaker is secured by five Torx screws.
To remove the speakers:
1. Prepare the computer for disassembly (see
2. Remove the rear covers (see
3. Remove the memory cover (see
4. Separate the computer from the column (see
5. Remove the M.2 cover (see
6. Remove the system board cover (see
7. Remove five Torx screws (1) that secure the right speaker (left when viewed from behind) to the
computer.
8. Remove the speaker cable from its routing path, and then disconnect the cable from the system board
(2).
9. Remove the five Torx screws (1) that secure the left speaker to the computer.
52 Chapter 4 Removal and Replacement Procedures
Preparing to disassemble the computer on page
Removing the rear covers from the computer on page
Memory on page 29).
Separating the computer from the column on page
M.2 cover and solid-state drive on page
System board cover on page
24).
33).
43).
23).
41).