Processor - HP Sprout Pro Maintenance & Service Manual

Processor

1. Prepare the computer for disassembly (see
2. Remove the rear covers (see
3. Remove the memory cover (see
4. Separate the computer from the column (see
5. Remove the system board cover (see
6. Remove the heat sink (see
7. Rotate the locking lever to its full open position (1).
CAUTION:
them could cause irreparable damage. Once pins are damaged it may be necessary to replace the
system board.
8. Raise and rotate the microprocessor retainer to its fully open position (2).
9. Lift the processor (3) straight up and remove it.
NOTE: After installing a new processor onto the system board, update the system ROM to ensure that the
latest version of the BIOS is being used on the computer. The latest system BIOS can be found on the Web at:
http://www.hp.com.
46 Chapter 4 Removal and Replacement Procedures
Removing the rear covers from the computer on page
Memory on page
Heat sink on page
Do NOT handle the pins in the processor socket. These pins are very fragile and handling
Preparing to disassemble the computer on page
29).
Separating the computer from the column on page
System board cover on page
45).
24).
43).
23).
41).