Usb Board - HP Sprout Pro Maintenance & Service Manual

USB board

When viewing the back of the computer, the USB board is located to the left of the system board.
To remove the USB board:
1. Prepare the computer for disassembly (see
2. Remove the right rear cover (see
3. Remove the memory cover (see
4. Disconnect the two cables from the board (1).
5. Remove the two Torx screws (2) that secure the board to the computer.
6. Lift the USB board from the computer.
To install the USB board, reverse the removal procedures.
40 Chapter 4 Removal and Replacement Procedures
Preparing to disassemble the computer on page
Removing the rear covers from the computer on page
Memory on page 29).
23).
24).