Speakers - HP ENVY x360 13 Maintenance And Service Manual

3. Disconnect the battery cable from the system board (see
4. Remove the display assembly (see
Remove the power connector cable:
1. Disconnect the power connector cable (1) from the system board.
2. Remove the power connector cable (2).
Reverse this procedure to install the power connector cable.

Speakers

To remove the speakers, use this procedure and illustration.
Table 5-7 Speaker description and part number
Description
Speakers (includes left and right speakers, cables, and four rubber isolators)
Before removing the speakers, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover
3. Remove the battery (see
Remove the speakers:
1. Disconnect the speaker cable (1) from the system board.
2. Release the tape tabs (2) that secure the speaker cables to the keyboard/top cover.
50 Chapter 5 Removal and replacement procedures for authorized service provider parts
39.6 cm (15.6 in) display assembly on page
(Preparation for disassembly on page
(Bottom cover on page 33).
Battery on page 34).
Battery on page 34).
39).
33).
Spare part number
L94513-001
ENWW