Usb Board - HP ZBook 15u Maintenance And Service Manual

USB board

Table 6-4 USB board description and part number
Description
USB board
Before removing the USB board, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover (see
3. Disconnect the battery cable from the system board (see
Remove the USB board:
1. Disconnect the cable from the ZIF connector on the USB board (1).
2. Remove the Phillips M2.0 × 3.0 screw (2) that secures the board to the computer.
3. Remove the board from the computer (3).
Reverse this procedure to install the USB board.
50 Chapter 6 Removal and replacement procedures for authorized service provider parts
(Preparation for disassembly on page
Bottom cover on page 32).
32).
Battery on page 44).
Spare part number
L65689-001