Usb/Audio Board - HP Pavilion X360 14M Maintenance And Service Manual

USB/audio board

Description
USB/audio board for use in full-featured models
USB/audio board for use in full-featured plus models
USB/audio board cable
Before removing the USB/audio board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
6. Remove the system board (see
Remove the USB/audio board:
1. Position the removed system board upright.
2. Disconnect the cable from the ZIF connector on the USB/audio board (1).
3. Remove the board from the system board (2).
Reverse this procedure to install the USB/audio board.
Bottom cover on page
Battery on page 33).
System board on page
31).
53).
Component replacement procedures
Spare part number
L18204-001
L18205-001
L20816-001
57