Download Print this page

Advertisement

Figure 42 Network diagram
IRF
SwitchD
1: GE1/0/1
2: GE1/0/2
3: GE1/0/3
SwitchA
Users

Upgrade procedure

Configuring link aggregation
1.
Configure the IRF fabric:
# Create three dynamic aggregation groups 1, 2, and 3.
<IRF> system-view
[IRF] interface bridge-aggregation 1
[IRF-Bridge-Aggregation1] link-aggregation mode dynamic
[IRF-Bridge-Aggregation1] quit
[IRF] interface bridge-aggregation 2
[IRF-Bridge-Aggregation2] link-aggregation mode dynamic
[IRF-Bridge-Aggregation2] quit
[IRF] interface bridge-aggregation 3
[IRF-Bridge-Aggregation3] link-aggregation mode dynamic
[IRF-Bridge-Aggregation3] quit
# Add ports GigabitEthernet 1/0/1, GigabitEthernet 2/0/1, and GigabitEthernet 3/0/1 that
connect to Switch A to aggregation group 1.
[IRF] interface GigabitEthernet 1/0/1
[IRF-GigabitEthernet1/0/1] port link-aggregation group 1
[IRF-GigabitEthernet1/0/1] quit
[IRF] interface GigabitEthernet 2/0/1
Core
SwitchE
4
2
3
1
2
1
1
3
1: GE1/0/1
2: GE1/0/2
3: GE1/0/3
SwitchB
Users
Aggregation Group 1
Aggregation Group 2
4: GE2/0/1
Aggregation Group 3
5: GE2/0/2
6: GE2/0/3
6
5
7
8
9
2
2
3
1
3
1: GE1/0/1
2: GE1/0/2
3: GE1/0/3
SwitchC
Users
114
SwitchF
7: GE3/0/1
8: GE3/0/2
9: GE3/0/3
1: GE1/0/1
2: GE1/0/2
3: GE1/0/3

Advertisement

   Also See for HP 5830 Series

Comments to this Manuals

Symbols: 0
Latest comments: