Download Print this page

HP 5830 Series Configuration Manual: Configuring Banners; Banner Input Methods

Hide thumbs

Advertisement

Step
1.
Enter system view.
2.
Enable displaying the
copyright statement.

Configuring banners

Banners are messages that the system displays during user login.
The system supports the following banners:
Legal banner—Appears after the copyright or license statement. To continue login, the user must
enter Y or press Enter. To quit the process, the user must enter N. Y and N are case-insensitive.
Message of the Day (MOTD) banner—Appears after the legal banner and before the login banner.
Login banner—Appears only when password or scheme authentication has been configured.
Shell banner—Appears for non-Modem users.

Banner input methods

You can configure a single-line banner or a multi-line banner:
Single-line banner.
A single-line banner must be input in the same line as the command. The start and end delimiters
for the banner can be any printable character, but they must be the same and must not be included
in the banner. The input text, including the command keywords and the delimiters, cannot exceed
510 characters. Do not press Enter before you input the end delimiter.
For example, you can configure the shell banner "Have a nice day." as follows:
<System> system-view
[System] header shell %Have a nice day.%
Multi-line banner.
A multi-line banner can be up to 2000 characters. To input a multi-line banner, use one of the
following methods:
Method 1—Press Enter after the last command keyword. At the system prompt, enter the banner
message and end with the delimiter character %. For example, you can configure the banner
"Have a nice day. Please input the password." as follows:
<System> system-view
[System] header shell
Please input banner content, and quit with the character '%'.
Have a nice day.
Please input the password.%
Method 2—After you type the last command keyword, type any single character as the start
delimiter for the banner and press Enter. At the system prompt, type the banner and end the last
line with a delimiter that is the same as the start delimiter. For example, you can configure the
banner "Have a nice day. Please input the password." as follows:
<System> system-view
[System] header shell A
Please input banner content, and quit with the character 'A'.
Have a nice day.
Command
system-view
copyright-info enable
125
Remarks
N/A
Enabled by default.

Advertisement

   Also See for HP 5830 Series

   Related Manuals for HP 5830 Series

Comments to this Manuals

Symbols: 0
Latest comments: