HP 5830 Series Configuration Manual page 37

Step
7. Apply an AAA
authentication scheme to
the intended domain.
8. Create a local user and
enter local user view.
9. Set an authentication
password for the local user.
10. Specifies a command level
of the local user.
11. Specify terminal service for
the local user.
12. Configure common settings
for console login.
The next time you attempt to log in through the console port, you must provide the configured login
username and password, as shown in
Command
a. Enter ISP domain view:
domain domain-name
b. Apply an AAA scheme to
the domain:
authentication default
{ hwtacacs-scheme
hwtacacs-scheme-name
[ local ] | local | none |
radius-scheme
radius-scheme-name
[ local ] }
c. Exit to system view:
quit
local-user user-name
password { cipher | simple }
password
•
In non-FIPS mode:
password [ [ hash ] { cipher |
simple } password ]
• In mode:
FIPS
password
authorization-attribute level level
service-type terminal
See "Configuring common console
login settings (optional)."
Figure 10.
30
Remarks
Optional.
By default, local authentication is
used.
For local authentication, configure
local user accounts.
For RADIUS or HWTACACS
authentication, configure the
RADIUS or HWTACACS scheme on
the device and configure
authentication settings (including the
username and password) on the
server.
For more information about AAA
configuration, see Security
Configuration Guide.
By default, no local user exists.
By default, no password is set.
Optional.
By default, the command level is 0.
By default, no service type is
specified.
Optional.