Upgrading System Software; Table 18 Ethernet Submenu Options - HP 6125G Release Note

Step
2. Disable password recovery
capability.

Upgrading system software

Upgrade system software by using one of the following methods:
Using TFTP through the management Ethernet port

Using FTP through the management Ethernet port

Using Xmodem through the console port

Using TFTP through the management Ethernet port
Connect the management Ethernet port of the switch to the PC that stores the target .bin file (the IP
1.
address of the PC is required), and connect the console port of the switch to the same or another
PC.
Run the TFTP server program on the PC connected to the management Ethernet port and specify the
2.
file storage directory.
NOTE:
The HP 6125 Blade switches are not shipped with TFTP server software. Prepare it yourself.
Run the terminal emulation program on the PC connected to the console port. Start the switch, enter
3.
the BootWare menu (see
Enter 3 in the BootWare menu to access the Ethernet submenu.
4.
=========================<Enter Ethernet SubMenu>=========================
|Note:the operating device is flash
|<1> Download Application Program To SDRAM And Run
|<2> Update Main Application File
|<3> Modify Ethernet Parameter
|<0> Exit To Main Menu
|<Ensure The Parameter Be Modified Before Downloading!>
==========================================================================
Enter your choice(0-3):

Table 18 Ethernet submenu options

Item
<1> Download Application Program To SDRAM And
Run
Command
undo password-recovery enable
Accessing the BootWare menu
Description
Download a system software image to the SDRAM
and run the image.
38
Remarks
To enable password
recovery capability, use
the password-recovery
enable command.
By default, password
recovery capability is
enabled.
for more information).
|
|
|
|
|
|