Download Print this page

Advertisement

Figure 34 Patches that are not loaded to the patch memory area
DEACTIVE state
Patches in DEACTIVE state have been loaded to the patch memory area but have not yet run in the system.
For example, suppose that the patch file you are loading has seven patches. After the seven patches
successfully pass the version check and CRC check, they are loaded to the patch memory area and are
in DEACTIVE state. In the patch area, patch states are as shown in
Figure 35 Patch states in the patch memory area after a patch file is loaded
ACTIVE state
Patches in ACTIVE state run temporarily in the system and become DEACTIVE at a reboot. For the seven
patches in
Figure
The patch states in the system are as shown in
The patches that are in ACTIVE state are in DEACTIVE state after system reboot.
35, if you activate the first five patches, their states change from DEACTIVE to ACTIVE.
Figure
36.
100
Figure
35.

Advertisement

   Also See for HP 5830 Series

   Related Manuals for HP 5830 Series

Comments to this Manuals

Symbols: 0
Latest comments: