Download Print this page

HP 5830 Series Configuration Manual: Startup Configuration Loading Process

Hide thumbs

Advertisement

To view the running configuration, including settings that have not been saved yet, use the display
current-configuration command. The displayed configuration does not include parameters that use
initial or product-specific default settings.

Startup configuration loading process

Figure 31
shows the configuration loading process during startup.
Figure 31 Configuration loading process during startup
Load default
configuration file
Software runs with
factory defaults
The device uses the following process to select the startup configuration file to load at startup:
1.
If you access the Boot menu to select the Skip Current System Configuration option, the device
starts up with empty configuration. All parameters are set to their initial settings.
2.
If you do not start the device with empty configuration, the following process applies:
a.
If you have specified a main startup configuration file, and this configuration file is available,
the device starts up with this startup configuration file.
b.
If you have not specified a main startup configuration file, or the specified main startup
configuration file is not available, the device starts up with the backup startup configuration
file.
No
No
Backup
No
configuration
file available?
Yes
Load backup
configuration file
Software runs with
Software runs with
backup file
Start
BootWare runs
Enter Boot
Yes
menu?
No
Startup
configuration
file specified?
Yes
Main
configuration
file available?
Yes
Select "Skip
Load main
Current System
configuration file
Configuration"
Software runs with
main file
initial settings
Finish
85

Advertisement

   Also See for HP 5830 Series

   Related Manuals for HP 5830 Series

Comments to this Manuals

Symbols: 0
Latest comments: