Kramer 691 User Manual page 66

11.3.3.2 AUD-SIGNAL
Functions
Set: -
AUD-SIGNAL?
Get
Description
Set: -
Get: Get audio input signal status
Response
AUD-SIGNALSPinp_id,statusCR LF
~nn@
Parameters
inp_id – audio input number: 1 (Audio In)
status – 0 (Off / no signal), 1 (On / signal present)
Response Triggers
After execution, a response is sent to the com port from which the get command was received
A response is sent to all com ports if the audio status was changed on any input
K-Config Example
"#AUD-SIGNAL? 1",0x0D
60
Permission
-
End User
Syntax
-
# AUD-SIGNAL?SPinp_idCR
Transparency
-
Public
691 - Protocol 3000