Kramer 691 User Manual page 63

11.3.2 Authentication Commands
Command
LOGIN
LOGOUT
PASS
SECUR
11.3.2.1 LOGIN
Functions
LOGIN
Set:
LOGIN?
Get:
Description
Set: Set protocol permission
Get: Get current protocol permission level
Response
Set: ~nn@LOGINSPlogin_level,passwordSPOKCR LF
or
~nn@LOGINSPERRSP004CR LF (if bad password entered)
Get: ~nn@LOGINSPlogin_levelCR LF
Parameters
login_level – level of permissions required: User, Admin
password – predefined password (by PASS command). Default password is an empty string
Notes
When the permission system is enabled, LOGIN enables running commands with the User or Administrator
permission level
When set, login must be performed upon each connection
The permission system works only if security is enabled with the SECUR command. It is not mandatory to
enable the permission system in order to use the device
K-Config Example
Set the protocol permission level to Admin (when the password defined in the PASS command is 33333):
"#LOGIN Admin,33333",0x0D
691 - Protocol 3000
Description
Set/get protocol permission
Cancel current permission level
Set/get password for login level
Set/get current security state
Permission
Not Secure
Not Secure
Syntax
#LOGINSPlogin_level,passwordCR
#LOGIN?CR
Transparency
Public
Public
57