Kramer 691 User Manual page 62

11.3.1.18 SIGNAL
Functions
Set: -
SIGNAL?
Get
Description
Set: -
Get: Get input signal lock status
Response
SPinp_id,statusCR LF
~nn@SIGNAL
Parameters
inp_id – input number: 1 (HDMI In)
status – lock status according to signal validation: 0 (Off), 1 (On)
Response Triggers
After execution, a response is sent to the com port from which the Get was received
A response is sent after every change in input signal status from On to Off or from Off to On
K-Config Example
Get the input signal lock status of HDMI In:
"#SIGNAL? 1",0x0D
56
Permission
-
End User
Syntax
-
#SIGNAL?SPinp_idCR
Transparency
-
Public
691 - Protocol 3000