Kramer 691 User Manual page 65

11.3.2.4 SECUR
Functions
SECUR
Set:
SECUR?
Get:
Description
Set: Start/stop security
Get: Get current security state
Response
~nn@SECURSPsecurity_modeCR LF
Parameters
security_mode – 1 (On / enable security), 0 (Off / disable security)
Notes
The permission system works only if security is enabled with the SECUR command
K-Config Example
Enable the permission system:
"#SECUR 1",0x0D
11.3.3 Audio Commands
Command Description
AUD-EMB
Get audio in video embedding status
AUD-SIGNAL?
Get audio input signal status
11.3.3.1 AUD-EMB
Functions
Set:
AUD-EMB?
Get:
Description
Set:
Get: Get audio in video embedding status
Response
~nn@AUD-EMBSPin,out,statusCR LF
Parameters
in – embedded audio input number: 1 (Audio In)
out – video output number in which audio is embedded: 1 (HDMI Out)
status – embedded status: 1 (On), 0 (Off)
Response Triggers
A response is sent to the com port from which the get command was received
After execution, a response is sent to all com ports if AUD-EMB was set by any other external control device
(button press, device menu and similar)
K-Config Example
"#AUD-EMB? 1,1",0x0D
691 - Protocol 3000
Permission
Administrator
Not Secure
Syntax
#SECURSPsecurity_modeCR
#SECUR?CR
Permission
End User
Syntax
#AUD-EMB?SPin,outCR
Transparency
Public
Public
Transparency
Public
59