Kramer 691 User Manual page 33

2. Set the video delay time in seconds.
3. Click Set.
To set the HDCP mode:
1. In the Navigation pane, click Video & Audio Settings. The Video & Audio
Settings page appears (see
2. View the HDCP input status.
3. Enable or disable the HDCP mode.
To set the audio switching delay:
1. In the Navigation pane, click Video & Audio Settings. The Video & Audio
Settings page appears (see
2. Set the delay times for:



3. Click Set.
691 - Using the Embedded Web Pages
The delay time is detected by the receiver. For example, the receiver
only senses that the clock was lost and acts according to the input
signal loss timeout.
You must set the HDCP preferences in at least the transmitter or
receiver.
New signal
Signal loss
Cable unplug
Audio Priority switching is set via the DIP-switches, see
Figure 16).
Figure 16).
Section 6.1 7.
27