Kramer 691 User Manual page 59

11.3.1.13 HDCP-MOD
Functions
HDCP-MOD
Set:
HDCP-MOD?
Get:
Description
Set: Set HDCP mode
Get: Get HDCP mode
Response
Set / Get: ~ nn @HDCP-MODSPinp_id,modeCR LF
Parameters
inp_id – input number: 1 (HDMI In)
mode – HDCP mode: 0 (HDCP Off), Mirror output: 3 (MAC mode)
Response Triggers
A response is sent to the com port from which the set (before execution) / get command was received
A response is sent to all com ports after command execution if HDCP-MOD was set by any other external
control device (device button, device menu or other) or if the HDCP mode changed
Notes
Set HDCP working mode on the device input:
HDCP not supported - HDCP Off
HDCP support changes following detected sink - MIRROR OUTPUT
K-Config Example
Disable HDCP mode on HDMI In:
"#HDCP-MOD 1,0",0x0D
691 - Protocol 3000
Permission
Administrator
End User
Syntax
#HDCP-MODSPinp_id,modeCR
#HDCP-MOD?SPinp_idCR
Transparency
Public
Public
53