Kramer 691 User Manual page 56

11.3.1.7 RESET
Functions
RESET
Set:
-
Get:
Description
Set: Reset device
Get: -
Response
~nn@RESETSPOKCR LF
Notes
To avoid locking the port due to a USB bug in Windows, disconnect USB connections immediately after
running this command. If the port was locked, disconnect and reconnect the cable to reopen the port.
K-Config Example
"#RESET",0x0D
11.3.1.8 SN
Functions
Set: -
SN?
Get:
Description
Set: -
Get: Get device serial number
Response
~nn@SNSPserial_numberCR LF
Parameters
serial_number – 11 decimal digits, factory assigned
Notes
This device has a 14 digit serial number, only the last 11 digits are displayed
K-Config Example
"#SN?",0x0D
50
Permission
Administrator
-
Syntax
#RESETCR
-
Permission
-
End User
Syntax
-
#SN?CR
Transparency
Public
-
Transparency
-
Public
691 - Protocol 3000