To set the UDP/TCP ports:
1. In the Navigation pane, click Device Settings. The Device Settings page
appears (see
2. Set the port number.
3. Click Set.
To save the current configuration to your PC:
1. In the Navigation pane, click Device Settings. The Device Settings page
appears (see
2. Configure the device as required.
3. Click Save.
The Save File window opens.
4. Browse to the required location to which to save the file.
5. Click OK.
The current configuration is saved.
To retrieve a saved configuration from your PC:
1. Connect your PC to the device to which you want to load the configuration.
2. Open the embedded Web pages (see
3. In the Navigation pane, click Device Settings. The Device Settings page
appears (see
4. Click Load.
The explorer window opens.
5. Browse to the required file.
691
-
Using the Embedded Web Pages
Figure
17).
Figure
17).
When using Chrome, the file is automatically saved in the Downloads
folder.
Figure
17).
Section
8.1).
31