Kramer 691 User Manual page 60

11.3.1.14 HDCP-STAT
Functions
Set: -
HDCP-STAT?
Get:
Description
Set: -
Get: Get HDCP signal status
Response
~ nn@HDCP-STATSPstage,stage_id,statusCR LF
Parameters
stage – 0 (input), 1 (output)
stage_id – for input stage: 1 (HDMI In), for output stage: 1 (HDMI Out)
status – signal encryption status: 0 (On), 1 (Off)
Response Triggers
A response is sent to the com port from which the Get command was received
Notes
Output stage (1) – get the HDCP signal status of the sink device connected to HDMI Out
Input stage (0) – get the HDCP signal status of the source device connected to the specified input
K-Config Example
Get the HDCP input signal status of the source device connected to HDMI In:
"#HDCP-STAT? 0,1",0x0D
NAME
11.3.1.15
Functions
NAME
Set:
NAME?
Get:
Description
Set: Set machine (DNS) name
Get: Get machine (DNS) name
Response
Set: ~nn@NAMESPmachine_nameCR LF
Get: ~nn@NAME?SPmachine_nameCR LF
Parameters
machine_name – String of up to 14 alpha-numeric characters (can include hyphens but not at the
beginning or end)
Notes
The machine name is not the same as the model name. The machine name is used to identify a specific
machine or a network in use (with DNS feature on).
K-Config Example
Set the DNS name of the device to "room-442":
"#NAME room-442",0x0D
54
Permission
-
End User
Syntax
-
#HDCP-STAT?SPstage,stage_idCR
Permission
Administrator
End User
Syntax
#NAMESPmachine_nameCR
#NAME?CR
Transparency
-
Public
Transparency
Public
Public
691 - Protocol 3000