Fitting Gas Inlet Casing - ABB TPL85-B14 Operation Manual

8.8
8.8
If removed:
CAUTION
© Copyright 2016 ABB. All rights reserved.
Disassembly and assembly

Fitting gas inlet casing

Fitting gas inlet casing
Fit the cover ring (51085) with the help of the two guide studs (90320).

Positioning the cover ring
Align the marking "TOP" on the cover ring (51085) with the position of
the gas outlet flange.
Make certain to install the cover ring in the correct position.

Coat the screw threads with high-temperature grease.

Screw in and tighten the screws (57005).

Remove the guide studs (90320).

Mount the nozzle ring (56001) on the gas inlet casing (51001) using

the screws (56014) and sleeves (56013).
Fit gas inlet casing (51001) complete with nozzle ring to gas outlet

casing (61001) using screws (61044).
Remove lifting gear complete with shackle (90195).

Fit insulation to gas inlet casing (51001).

Operation Manual / TPL85-B14/-B15/-B16
8
8.8 Page 105