ABB TPL85-B14 Operation Manual page 63

5.4.2
NOTICE
NOTICE
© Copyright 2016 ABB. All rights reserved.
Maintenance
Cleaning the compressor during
operation
Wet cleaning using vacuum cleaning device on filter silencer (XC4)
Operating state prerequisites for compressor cleaning with XC4
In order to carry out a successful cleaning procedure which has been
tested and is recommended by ABB Turbo Systems, the following pre-
requisite must be met:
Engine load 25 to 85 %

Start the cleaning cycle according to the following description Wet

cleaning procedure with XC4.
Procedure for compressor wet cleaning with XC4
01 Cleaning medium vessel
03 Injection pipe
05 Cover
When using the cleaning medium vessel on the filter silencer, refer to
the detailed cleaning instructions on the plate (04) attached to the filter
silencer.
Operation Manual / TPL85-B14/-B15/-B16
5
5.4
02 Pipe
04 Cleaning instructions
06 Valve
Page 61