ABB TPL85-B14 Operation Manual page 119

9.2.2
Table of tools
Table of tightening tor-
ques [Nm]
© Copyright 2016 ABB. All rights reserved.
Short-term turbocharger shut-down
Locking the rotor
Fitting locking device
Remove filter silencer and internal part of compressor casing complete

with wall insert and diffuser. (See chapter Disassembly and assembly.)
Fix partition wall using press-off tools (90920) and screws.

Fit locking device (90020) in accordance with following illustrations.

Make sure the intermediate rings, the spacer ring and the adapter ring are
fitted correctly.
All parts must be kept clean and free from grease.
Part number
74027
90020
90920
94001 / 94002
94003
94004
94006 / 94008
94031
94032
The locking flange (94003) must be fitted to the compressor wheel using
at least 9 screws (94008), tightened according to the Table of tightening
torques.
Part number
94006
94008
Operation Manual / TPL85-B14/-B15/-B16
9
9.2
Description
Hexagon nut
Locking device
Press-off tool with screw
Intermediate ring
Locking flange
Adapter ring
Hexagon-head screw
Spacer ring
Washer
TPL85-B14/-B15/-B16
M12
75
M12
60
Page 117