NOTICE
NOTICE
© Copyright 2016 ABB. All rights reserved.
Disassembly and assembly
Silencer casing
Fitting
Screws on the silencer casing
All silencer casing screws may be tightened only when assembly work
is finished. Only then is it possible for all parts to be fitted.
Do not tighten screws during assembly.
Fit bottom part (1) to filter silencer using screws (A) and (B).
Screw (A)
The position of screw (A) serves as a reference for correct fitting of the
silencer casing.
Before removal of bottom part (1), mark position of screw (A).
Fit all remaining screws on bottom part (1).
Operation Manual / TPL85-B14/-B15/-B16
8
8.3
Page 94