Axial Clearance - ABB TPL85-B14 Operation Manual

8.5
8.5
WARNING
Clearance A [mm]
CAUTION
© Copyright 2016 ABB. All rights reserved.
Disassembly and assembly

Axial clearance

Axial clearance
Physical hazards due to sharp edges on compressor wheel
The compressor wheel has sharp edges which can result in injury.
Wear safety gloves.

Wear safety gloves against mechanical risks.
Screw on at least four nuts (74027) along with washers (74018),

equally spaced around the circumference, and tighten them to secure
the partition wall axially.
Measure and note the axial clearance (A).

If the axial clearance A is out of tolerance, an ABB Turbocharging Ser-
vice Station must be contacted.
Operation Manual / TPL85-B14/-B15/-B16
8
8.5
TPL85-B
0.54 ... 0.79
Page 99