Removing Internal Part Of Compressor Casing - ABB TPL85-B14 Operation Manual

8.6
8.6
CAUTION
Position of the safety
segments during disas-
sembly
NOTICE
Control dimension (u)
[mm]
© Copyright 2016 ABB. All rights reserved.
Disassembly and assembly
Removing internal part of compressor
casing

Removing internal part of compressor casing

Locked safety segments (76080) during disassembly
Observe the maximum tightening torque for the nuts (90458) so as not
to shear off the threaded studs of the safety segments (76080).
Fit four nuts (74027) complete with washers (74018), equally spaced

around circumference, and tighten.
Take nuts (90458) out of the toolbox and screw them onto threaded

studs of three safety segments (76080) in the compressor casing in-
ternal part (76000).
Tighten the nuts (90458) to a maximum torque of 30 Nm.

Note the control dimension (u).
Dimension
u
The compressor casing internal part (76000) has now been detached from
the compressor casing external part (74000) and can be removed.
Operation Manual / TPL85-B14/-B15/-B16
8
8.6
TPL85-B
Page 100
27.6