ABB TPL85-B14 Operation Manual page 111

WARNING
Clearance A [mm]
CAUTION
Installing the filter silencer
© Copyright 2016 ABB. All rights reserved.
Disassembly and assembly
Fitting internal part of compressor
casing
Risk of injury due to sharp edges on the compressor wheel
The compressor wheel has sharp edges which can cause injuries.
Wear safety gloves.

Wear safety gloves against mechanical risks.
Measure and note the axial clearance (A).

If the axial clearance A is out of tolerance, an ABB Turbocharging Ser-
vice Station must be contacted.
Unscrew nuts (74027) and remove them together with washers

(74018).
Fit the filter silencer and fasten it using the nuts (74027) and the

washers (74018) (see the section Removing and installing the filter
silencer).
Connect all air lines in accordance with the enginebuilder's instruc-

tions.
Fit all the insulation which was previously removed.

Operation Manual / TPL85-B14/-B15/-B16
8
8.9
TPL85-B
0.54 ... 0.79
Page 109