CAUTION
Position of the safety
segments after assembly
NOTICE
Control dimension (s)
[mm]
© Copyright 2016 ABB. All rights reserved.
Disassembly and assembly
Fitting internal part of compressor
casing
Locked safety segments (76080) during assembly
The safety segments (76080) are not in the operating position. Addi-
tional axial securing of the two compressor casings (74000/76000) is
not guaranteed.
Fit four nuts (74027) complete with washers (74018), equally spaced
around circumference, and tighten.
Unscrew the nuts (90458) on threaded studs of three safety segments
(76080) on the compressor casing internal part (76000).
The compressor casing internal part (76000) is now secure relative to the
compressor casing external part (74000).
Note control dimension (s). The safety segments (76080) are again in
the operating position.
Dimension
s
Put the nuts (90458) back in the toolbox.
Operation Manual / TPL85-B14/-B15/-B16
8
8.9
TPL85-B
Page 108
18.5