Dry-Cleaning Device - ABB TPL85-B14 Operation Manual

8.10
8.10
Tightening torques [Nm]
© Copyright 2016 ABB. All rights reserved.
Disassembly and assembly

Dry-cleaning device

Dry-cleaning device
The assembly of the dry-cleaning device is described below.
Brush the thread of the parts marked with *) with high-temperature
grease.
Fit the connecting plate (51511) onto the pressure vessel (51501) with

hexagon-head screws (51518) and washers (51519).
Mount the connecting plate (51511) onto the gas outlet casing with

hexagon-head screws (51520).
Fit the screw insert (51514*) onto the gas inlet casing.

Fit the straight screw-in coupling (51522*) on the ball valve (51513)

and the pipe elbow (51521).
Fit the pipe elbow (51521) onto the screw insert (51514*).

Fit the hose (51512*) on the pressure vessel (51501) and on the ball

valve (51513).
Fit clamps (51515) on the gas inlet casing.

51512 51513
1) 1)
R3/4" – G1/2" –
G3/4" R1/2"
Screw in the screw connection hand tight at first, then tighten by another 2 to
1)
3 turns.
Operation Manual / TPL85-B14/-B15/-B16
8
8.10
51514 51515
51518
M18x1.5 M6
80 10
Page 110
51520 51521 51522
M8 M30x2 G1/2" –
25 200 G1/2A
1)