Fitting The Gas Inlet Casing, The Nozzle Ring And The Insulation (A175-L And Smaller); Fig. 47: Fitting The Nozzle Ring (A175-L And Smaller); Table 33: Tightening Torque (56014) - ABB A180-L37 Operation Manual

Operation Manual / 4 Product description / A100-L
8 Disassembly and assembly / 8.10 Fitting the gas inlet casing, the
nozzle ring and the insulation (A175-L and smaller)
8.10 Fitting the gas inlet casing, the nozzle ring and
the insulation (A175-L and smaller)
Fitting the nozzle ring
Coat the screw threads with high-temperature grease.
u
Fig. 47: Fitting the nozzle ring (A175-L and smaller)
Part number
56014
Table 33: Tightening torque (56014)
1. Align the notch (A
1
the gas inlet casing (51001).
2. Fit screws (56014) with high-temperature grease and with washers (56011).
© Copyright 2018 ABB. All rights reserved.
A165-L
M10
35 Nm
) with the flange connection (A
A170-L
M10
35 Nm
) and slide the nozzle ring (56001) into
2
HZTL4034_EN
A175-L
M10
35 Nm
Revision N November 2018