Appendix B - Hantek 1008 User Manual

Hantek1008
Appendix B: General Maintenance
General Care
Do not store or leave the oscilloscope where the device will be exposed to direct sunlight
for long periods of time.
Caution
To avoid damages to the device or probes, do not expose them to spray, liquids or
solvents.
To avoid damages to the surface of the device or probes not use any abrasive or chemi-
cal cleaning agents.
Cleaning
Inspect the device and probes as often as operating conditions require. Make sure the
device disconnect from all power sources.
To clean the exterior surface, perform the following steps:
1. Remove loose dust on the outside of the oscilloscope and probes with a lint-free cloth.
Use carefully to avoid scratching the glass display.
2. Use a soft semi-dry cloth to clean the device.
84