Measure Signal - Hantek 1008 User Manual

Hantek 1008
DIGITAL OSCILLOSCOPE

Measure Signal

Cursor Menu
Click "Cursor" in main menu.
This method allows you to take measurements by moving the cursors.
1. Source
The user can set the source to CH1, CH2, CH3,CH4 , CH5, CH6,CH7 CH8 8 8 and MATH.
When you use cursors, be sure to set the Source to the waveform on the display that
you want to measure.
2. Type
There are four types of cursors: Cross, Trace, Vertical and Horizontal.
55