Taking Cursor Measurements - Hantek 1008 User Manual

Hantek 1008
DIGITAL OSCILLOSCOPE

Taking Cursor Measurements

Use cursors to make time and amplitude measurements on a waveform quickly.
Measure the Peak Frequency or Time of the First Sine Waveform
Do these steps:
1. Click "Cursor->Source ", select CH1(select CH2-CH8 if you want measure CH2-CH8).
2. Click "Cursor->Type", select Vertical.
3. Push left mouse button, and the vertical lines appear.
4. Drag the mouse button to the point you want to measure.
5. Release the left mouse button, the frequency difference and time difference will be
shown at the status bar.
Measure the Frequency and Time:
77