Hantek 1008 User Manual page 38

Hantek 1008
DIGITAL OSCILLOSCOPE
Setup the Oscilloscope
Save Setup
The oscilloscope software saves the current setup before you close the oscilloscope
software. The oscilloscope recalls this setup the next time you run the software. You can
use the "Save Setup" menu to permanently save several different setups.
Load Setup
The oscilloscope can recall the last setup-any saved setups or the factory setup-before
the oscilloscope software was running. You can use the "Load Setup" menu to perma-
nently recall a setup.
Factory Setup
The oscilloscope software is set up for normal operation when it is shipped from the fac-
tory. This is the factory setup. To recall this setup, push the "Factory Setup" menu.