Function Check - Hantek 1008 User Manual

■
If necessary, use the supplied non-metallic tool to adjust the trimmer capacitor of the
probe for the flattest square wave being displayed on the oscilloscope.
■
Repeat if necessary.
WARNNING: To avoid electric shock while using the probe, be sure the perfection of the
insulated cable, and do not touch the metallic portions of the probe head while it is con-
nected with a voltage source.

Function Check

Perform this functional check to verify that your oscilloscope is operating correctly.
■
Connect the oscilloscope
You should connect the A-Type Plug of USB cable to your PC USB port and connect
the B-Type Plug of USB cable to oscilloscope USB port.
Under Compensated
Hantek 1008
DIGITAL OSCILLOSCOPE