Hantek 1008 User Manual page 79

Hantek1008
Read the details showing in the status bar.
Measure the Amplitude of the First Waveform Peak of the Waveform
Do these steps:
1. Click "Cursor->Source", select CH1 (select CH2 if you want measure CH2).
2. Click "Cursor->Type", select Horizontal.
3. Push left mouse button, and the Horizontal lines appear.
4. Drag the mouse button to the point you want to measure.
5. Release the left mouse button, the voltage difference will be shown at the status bar.
Measure the Amplitude:
78