General Safety Summary - Hantek 1008 User Manual

General Safety Summary

Review the following safety precautions carefully before operating the device to avoid
any personal injuries or damages to the device including any products connected to it.
To avoid any potential hazards use the device as specified by this user's guide only.
■
To Avoid Fire or Personal Injury.
■
Use Proper Power Cord. Use only the power cord specified for this product and
certified for the correct country of use.
■
Connect and Disconnect Properly. Do not connect or disconnect probes or test
leads while they are connected to a voltage source.
■
Connect and Disconnect Properly. Connect the probe output to the measurement
device before connecting the probe to the circuit under test. Disconnect the probe
input and the probe reference lead from the circuit under test before disconnecting
the probe from the measurement device.
■
Observe All Terminal Ratings. To avoid fire or shock hazard, observe all ratings
and markings on the product. Consult the product manual for further ratings informa-
tion before making connections to the product.
■
Use Proper Probe. To avoid shock hazard, use a properly rated probe for your mea-
surement.
■
Avoid Circuit or Wire Exposure. Do not touch exposed connections and compo-
nents when power is on.
■
Do Not Operate With Suspected Failures. If suspected damage occurs to the
device, have it inspected by qualified service person before further operations.
■
Provide Proper Ventilation. Refer to the installation instructions for proper ventilation
of the device.
■
Do Not Operate in Wet/Damp Conditions.
■
Do Not Operate in an Explosive Atmosphere.
■
Keep Product Surfaces Clean and Dry.
Hantek 1008
DIGITAL OSCILLOSCOPE