Networking Page: Ethernet Port Values - Dell DR4000 Administrator's Manual

FILE LOCATION: C:\Users\bruce_wylie\Documents\~Dell
Docs\~FINAL_DR4000_1.0.1.1_DOCS\~Final_1.0.1.1_DR4000_Admin_Guide_Files\~3-

Networking Page: Ethernet Port Values

The Networking page displays the currently configured multiple Ethernet
ports for the 1-GbE (or 10-GbE/10-GbE SFP+) NICs that are bonded
together into a single interface:
• In a 1-GbE NIC configuration, the two LAN on Motherboard (LOM)
ports, and the two ports on the NIC card itself, are bonded together to
constitute the four ports.
• In 10-GbE or 10-GbE SFP+NIC configurations, only the two ports on
the 10-GbE and 10-GbE SFP+ NIC are bonded together.
The ports for the bonded NICs display the MAC address, the port speed in
megabtyes/second, a maximum speed, and the duplex setting.
The following example shows Ethernet port values for the Ethernet ports in a
1-GbE NIC bonded configuration:
• Eth0:
– MAC address: 00:30:59:9A:00:96
– Speed (1000Mb/s)
– Max Speed (1000baseT/Full)
– Duplex (Full)
• Eth1:
– MAC address: 00:30:59:9A:00:97
– Speed (1000Mb/s)
– Max Speed (1000baseT/Full)
– Duplex (Full)
• Eth2:
– MAC address: 00:30:59:9A:00:98
– Speed (1000Mb/s)
– Max Speed (1000baseT/Full)
– Duplex (Full)
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 4 / 5 / 1 2 - F O R P R O O F O N LY
Configuring the DR4000 System Settings
35