Dell DR4000 Administrator's Manual page 107

FILE LOCATION: C:\Users\bruce_wylie\Documents\~Dell
Docs\~FINAL_DR4000_1.0.1.1_DOCS\~Final_1.0.1.1_DR4000_Admin_Guide_Files\~3-
Table 8-2. DR4000 System Event Messages
System Event Message
System Event = Type 1
No valid system name was found in
the configuration database.
No valid system configuration
file(s) were found in the
configuration database.
Data volume filesystem is not yet
initialized.
Backup configuration file is missing. Use the CLI maintenance --configuration
Working configuration file is
missing.
Working configuration file is
corrupted.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 4 / 5 / 1 2 - F O R P R O O F O N LY
Description/Meaning or Action
For more information, see "Configuring
Networking Settings" on page 31.
You can also use the CLI maintenance
--recover command to recover the backup
configuration (for more information, see the
Dell DR4000 System Command Line
Reference Guide
).
Use the CLI maintenance --configuration
--restore command to recover the backup
configuration (for more information, see the
Dell DR4000 System Command Line
Reference Guide
).
The DR4000 system did not initialize properly.
Contact Dell Support for assistance or
intervention.
--restore command to recover the backup
configuration (for more information, see the
Dell DR4000 System Command Line
Reference Guide
).
Use the CLI maintenance --configuration
--restore command to recover the backup
configuration (for more information, see the
Dell DR4000 System Command Line
Reference Guide
).
Use the CLI maintenance --configuration
--restore command to recover the backup
configuration (for more information, see the
Dell DR4000 System Command Line
Reference Guide
).
Troubleshooting and Maintenance
99